Day 2

Day two on the skirt and the most tricky part of all, making sure that the hem line is equal and in even proportion. Using the balance line of 24cm from the ground I levelled out the skirts hem on the front panel, as in places it was an inch longer and in others the correct length from the ground. I also used the balance line to even out the train at the back two panels, the left hand side needed to be shortened by 3cm.

Another learning curve was how to flat bind. I am used to working with a bound edge or using bias binding to create a decorative addition to the garment so this was quite new for me. Instructions on how to do this shall be placed on another page and in my workbook.  This was tricky at first as trying to get the binding to lay flat around the back train was tricky however I learnt you can stretch the binding out and use an iron to help shape it. Once this was mastered the flat areas of the skirt were quick and sufficiently applied. 

After four weeks the skirt is finally finished. All that is left is for it to pass inspection at the dress parade and for my actress to check she is comfortable in the skirt. 

Below is the final skirt, once again thanks to bryony for modelling for me.